View D1U4CS-W-2200-12-HA3C_4922349.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

D1U4CS-W-2200-12-HxxC Series
AC/DC Front End Power Supply
PRODUCT OVERVIEW
The D1U4CS-W-2200-12-HxxC is a 2200 Watt, power-factor-corrected (PFC) front-end power supply for hotswapping redundant systems. The main output is 12V with standby output of 5V or 3.3V. Packaged in 1U low profile, it is designed to deliver reliable bulk power to servers, workstations, storage systems or any 12V distributed power architecture systems requiring high power density. The highly efficient electrical and thermal design with internal cooling fans supports reliable operation conditions. The D1U4CS-W-2200-12-HxxC is designed to auto-recover from overtemperature fault. Status information is provided with front panel LEDs, logic signals and I2C management interface. Four units can be packaged into an optional 19" 1U power shelf to provide up to 8.8kW of power.
SELECTION GUIDE
Model Number
D1U4CS-W-2200-12-HC4C D1U4CS-W-2200-12-HC3C D1U4CS-W-2200-12-HA4C D1U4CS-W-2200-12-HA3C
Power Output High Line AC
2200W 2200W 2200W 2200W
Power Output Low Line AC
1100W 1100W 1100W 1100W
Main Output
12.12V 12.12V 12.12V 12.12V
Standby Output
3.3V 3.3V 5V 5V
Airflow
Back to front Front to back Back to front Front to back
FEATURES
2200W (220Vac), 1100W (110Vac) Output Power ed to Climate Savers Computing Certifi InitiativeSM and 80 PLUS(R) Gold efficiency Main Output, 3.3V or 5V Standby Output 12V sized; dimensions 14.0" x 4.0" x 1.6" 1U Watts per cubic inch density 24.5 redundancy capable, N+1 including hot-docking Active Current Sharing on main output Over-voltage, Over-current, Over-temperature protection Internal cooling fans (variable speed) Bus Interface, PSMI compliant IC compliant RoHS Optional 1U x 19" Power-Shelf
INPUT CHARACTERISTICS
Parameter
Input Voltage Operating Range Input Frequency Turn-on Input Voltage Turn-off Input Voltage Maximum Input Current Inrush Current Power Factor
Conditions
Low Line AC High Line AC Ramp up Ramp down Low Line AC 90Vac High Line AC 180Vac Cold start between 0-1msec Output load >90% Output load >50%
Min.
90 180 47 81 70.5
Typ.
Max.
140 264 63 89 78 13 13 16.5
Units
Vac Hz Vac Arms Apk
60
0.95 0.95
OUTPUT VOLTAGE CHARACTERISTICS
Output Voltage Parameter
Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise Output Current Load Capacitance Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise Operating Range Load Capacitance Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise Operating Range Load Capacitance
Conditions
Min.
11.76
Typ.
12.12
Max.
12.48 120 180 30000
Units
Vdc mV p-p A F Vdc mV p-p A F Vdc mV p-p A F
12V
20MHz Bandwidth 0 5 20MHz Bandwidth 4.85 0 3.3 20MHz Bandwidth 3.2 0
5Vsb
5.15 50 5 10000 3.4 50 6 10000
3.3Vsb
1 Ripple and noise are measured with 0.1 uF of ceramic capacitance and 10 uF of tantalum capacitance on each of the power supply outputs. The output noise requirements apply over a 0 Hz to 20 MHz bandwidth. A short coaxial cable with 50ohm scope termination is used.
For full details go to www.murata-ps.com/rohs
www.murata-ps.com
17 Aug 2010
email: toronto@murata-ps.com
CPS_D1U4CS-2200-12-HxxC.A04 Page 1 of 5
D1U4CS-W-2200-12-HxxC Series
AC/DC Front End Power Supply
OUTPUT CHARACTERISTICS
Parameter
Remote Sense Efficiency (80+ measurement; excludes fan load) Output Rise Monotonicity Start-up Time
Conditions
Min.
Typ.
120
Max.
Units
mV %
Transient Response
20% and full load 89.10 50% load 93.04 Overshoot less than 10% for all outputs, no voltage negative between 10% to 95% during ramp up AC ramp up 1.5 PS_On activated 150 12V Ramp 1A/s 360 5Vsb Ramp 1A/s 150 3.3Vsb Ramp 1A/s 100 At 100% load All outputs within regulation 100% load 7 5 12
s ms mV
Current sharing accuracy (up to 3 in parallel) Hot Swap Transients Hold-up Time
% % ms
GENERAL CHARACTERISTICS
Parameter
Storage Temperature Range
Conditions
Non-condensing D1U4CS-W-2200-12-HC4C and D1U4CS-W-2200-12-HA4C models only D1U4CS-W-2200-12-HC3C and D1U4CS-W-2200-12-HA3C models only Non-condensing
Min.
-40 0 0 10 5
Typ.
Max.
70 50 40 90 90
Units
Operating Temperature Range
C
Operating Humidity Storage Humidity Shock Sinusoidal Vibration MTBF Acoustic Safety Approvals Input Fuse Material Flammability Switching Frequency Weight
%
30G non operating 0.5G, 5 - 500 Hz operating Calculated per Bellcore at Ta=30C 400 Demonstrated 400 ISO 7779-1999 c-CSA-us (CSA 60950-1-03/UL 60950-1, Second Edition) Power Supply has internal 20A/250V fast blow fuse on the AC line input UL 94V-0 TBD 2.1kg
60
Khrs Khrs dB LpAm
PROTECTION CHARACTERISTICS
Output Voltage Parameter
Over-temperature Over Voltage Over Current Over Voltage Over Current Over Voltage Over Current
Conditions
Auto-restart Latching Latching Latching Brick wall, autorecovery Latching Brick wall, autorecovery
Min.
55 13.12 197 5.6 5.5 3.57 6.5
Typ.
Max.
65 14.12 225 6.26 6.25 4.02 8.0
Units
C V A V A V A
12V 5Vsb 3.3Vsb
www.murata-ps.com
17 Aug 2010
email: toronto@murata-ps.com
CPS_D1U4CS-2200-12-HxxC.A04 Page 2 of 5
D1U4CS-W-2200-12-HxxC Series
AC/DC Front End Power Supply
ISOLATION CHARACTERISTICS
Parameter
Insulation Safety Rating / Test Voltage Isolation Material Flammability Grounding
Conditions
Min.
Typ.
Max.
Units
Input to Output - Reinforced 3000 Vrms Input to Chassis - Basic 1500 Vrms Output to Chassis Output to Output UL 94V-0 Main Output Return and Standby Output Return are connected internally. 100k resistor parallel with 100nF capacitor is connected between Return and power supply chassis. Main Output Return should be connected to the System Chassis
CONTROL SIGNALS
Status
LED I2C Registers
Conditions
Off Flashing Green Green Refer to Application Note #ACAN-33
Description
No AC input to all PS Main Output Absent Power Supply Good
EMISSIONS AND IMMUNITY
Characteristic
Harmonics Voltage Fluctuation and Flicker Emission Conducted Emission Radiated ESD Electromagnetic Field Electrical Fast Transients/Burst Surge RF Conducted Immunity Magnetic Immunity Voltage dips, interruptions
Description
IEC/EN 61000-3-2 IEC/EN 61000-3-3 FCC 47 CFR Parts 15/CISPR 22/EN55022 FCC 47 CFR Parts 15/CISPR 22/EN55022 IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 IEC/EN 61000-4-8 IEC/EN 61000-4-11
Criteria
Class A, 6dB margin Class A, 6dB margin 4kV contact discharge 8kV operational air discharge 15kV non-operational air discharge
1kV/2kV, Performance Criteria A 3 Vac, 80% AM, 1kHz, Performance Criteria A 3 A/m
www.murata-ps.com
17 Aug 2010
email: toronto@murata-ps.com
CPS_D1U4CS-2200-12-HxxC.A04 Page 3 of 5
D1U4CS-W-2200-12-HxxC Series
AC/DC Front End Power Supply
OUTPUT CONNECTOR AND SIGNAL SPECIFICATION
DC and Signal Connector: FCI PowerBlade # 51732-048LF
P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 x1 AC_OK/H x2 PW_OK/H SMB/ Alert I2C ADR0 x3 Vsb RETURN Vsb RETURN I2C ADR1 x4 Vsb RETURN Vsb RETURN I2C ADR2 I2C CLOCK x5 Vsb +OUT Vsb +OUT PS_KILL x6 Vsb +OUT Vsb +OUT PS_ PRESENT PS_ON/L D
SPARE VOUT VOUT VOUT VOUT VOUT VRTN VRTN VRTN VRTN VRTN I_SHARE
C
B
SENSE +
SENSE -
I2C DATA
SPARE
A
mate-last pins
Pin Assignment
P1 to P5 P6 to P10 A1 A2 C5, C6, D5, D6 C3, C4, D3, D4 B1 D1 D2 C2
Signal Name
VOUT VRTN Sense + Sense Vsb Vsb Return I_Share AC_OK/H PW_OK/H SMB/Alert
Description
Main output voltage Main output voltage, return VOUT remote sense, positive node input, connected to the +ve load point VOUT remote sense, negative node input, connected to the -ve load point Standby voltage output Standby voltage, return, tied internally to Output Return Active load sharing bus Input AC Voltage "OK" signal output (Internal pull up is 10k to 3.3V) Internal pull up of 10K ohm to 3.3V SMB/Alert signal output (open collector) Floating pin will turn off P/S (shorter pin, last-make and first-break contact for hot plugging). This signal overrides PS-On in disabling the Main Output Internally tied to 3.3V return Internal 3.3K ohm pull-up to 3.3V, (accepts open collector/ drain drive), This signal to be pulled low to turn-on power supply I2C serial data bus; internal 4.64K ohm pull-up I2C serial clock bus; internal 4.64K ohm pull-up Address input 0, internal 10K ohm pull-up to 3.3V Address input 1, internal 10K ohm pull-up to 3.3V Address input 2, internal 10K ohm pull-up to 3.3V
High Level Low Level
I Max
0 - 8V >2.1V <0.8V >2.1V <0.8V
-4 mA / +5 mA +4 mA -2 mA +4 mA -2 mA
B5 B6 A6 A3 A4 B2 B3 B4
PS_Kill PS_Present PS_On/L I2C Data I2C Clock I2C Adr0 I2C Adr1 I2C Adr2
>2.1V (open) <0.8V (active, PS:On) 0V >2.1V (open, or 3.3V) <0.8V (active, PS:On) 3.3V 3.3V >2.1V <0.8V >2.1V <0.8V >2.1V <0.8V
N/A
1 mA 1 mA 1 mA
D1U4CS MATING CONNECTORS
12V D1U4 mating connector Press Fit Straight
Murata-PS FCI N/A N/A
Solder 1 Right Angle Straight
N/A N/A N/A N/A
Right Angle
4321-01454-0 51762-11002400ABLF
1 Solder connector recommended for board thickness of <0.090
www.murata-ps.com
17 Aug 2010
email: toronto@murata-ps.com
CPS_D1U4CS-2200-12-HxxC.A04 Page 4 of 5
D1U4CS-W-2200-12-HxxC Series
AC/DC Front End Power Supply
MECHANICAL DIMENSIONS - D1U4CS-W-2200-12-HxxC
Airflow Front to Back Airflow Back to Front
41.00 0.40 1.614 0.016
7.62 0.40 0.300 0.016
12.63 0.40 0.497 0.016
349.60 0.40 13.764 0.016
8.89 0.25 0.350 0.010 355.60 0.65 14.000 0.026
AC Input Connector: The AC input connector is standard IEC C20 20A.
Dimensions: 13.76"L x 4.00" W x 1.61" H
OPTIONAL ACCESSORIES
Description
12V D1U4CS output connector card
Part Number
D1U4CS-12-CONC
APPLICATION NOTES
Document Number
ACAN-32 ACAN-33
Description
Output Connector Card for D1U4CS D1U4CS Communication Protocol
Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. (c) 2010 Murata Power Solutions, Inc.
www.murata-ps.com/locations
17 Aug 2010
2.40 0.25 0.094 0.010
email: toronto@murata-ps.com
CPS_D1U4CS-2200-12-HxxC.A04 Page 5 of 5
101.60 0.50 4.000 0.020

▲Up To Search▲

Price & Availability of D1U4CS-W-2200-12-HA3C

	To Download D1U4CS-W-2200-12-HA3C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .